 |
Enquire now
0408 717 883 |
|
|
 |
|
|
Stone surfaces are a sizeable and beautiful investment, we have created this simple guideline to prolong the life your stone and keep your newly re-finished stone looking its best.
|
 |
The most common problem associated with stone flooring is surface ware. Surface ware is micro scratches on the stone caused by abrasive materials including sand, dirt and debris damaging the stone with foot traffic. Eliminating abrasive materials will significantly prolong the time between re-finishing. Using a clean, un-treated dust mop the stone as often as possible. Your stone floors can never be dust mopped too often. Place mats on all entry points, as large as possible. This will minimize the majority of grit being tracked onto the floor. Clean the mat at least once a week to remove all debris; friction between the grit and the mat will cause ware.
|
Most household chemicals are not safe for stone and most will do more harm than good. Always use a PH Neutral stone cleaner and a damp mop when cleaning your floors. Not much is needed, if you dip your fingers in the solution and it feels 'soapy' you have used too much cleaner, resulting in streaking when the water evaporates. Remember to change the water when it discolours and looks dirty. Please call us if you need help choosing a neutral cleaner. If you notice your stone discolours and absorbs the mob water, it will require sealing to prevent the surface staining.
Depending on the stone, a professional deep clean is recommended every 1 - 2 years to remove any ground in dirt and grease. This is quite inexpensive and not only keeps your stone looking its best but also unclogs the stone and reduces the risk of ground in stains.
NEVER pressure wash your stone. Marble, limestone, travertine and sandstone are very sensitive to the extreme pressures created when using high pressure cleaners. These materials contain soft spots in the stone which is blown away when pressure washed.
|
|
 |
Country to floors, etching is the most common problem to your bench tops. Etching is caused by acids physically eating into your stone and looks like a light coloured stain. Citrus, soft drinks, wine, toothpaste, cologne and perfume all contain acids. Always use coasters as often as possible especially on marble tops. Blot spills, never wipe with absorbent paper towels and rinse with clean water. Use the same PH neutral cleaner in a spray bottle and clean with a soft microfiber cloth weekly. Never use a kitchen scourer on any stone surface.
|
|
 |
Obviously walls rarely get damaged by ware or etching, however, your shower walls are prone to soap scum build up much the same as glass is. After your shower always squeegee down all stone surfaces, even if you don't use soap. When the water evaporates, soap and minerals are left behind, creating deposits. Water actually sticks to these deposits causing the stone to look dull over time. Most bathroom cleaners contain acid and should be avoided.
|
|
|
|
|
|
